Hướng dẫn Update FIRMWARE cho tất cả các dòng máy Nokia S60v. S60v5

ToiTim.Net -

Hướng dẫn Update Firmware Offline bằng Phoenix
(Khuyên Dùng Vì Độ An Toàn Cao Đến ..,..%)


.. Download Phoenix_Service_Software_.0.0.0..00....5.6 về và cài vào PC











.. Cắm điện thoại vào PC thông qua cáp và chọn kết nối PC Suite



.. Chạy Phoenix đã được cài sẵn trên PC



.. Chọn File / Scan Product



5. Sau khi Scan Product xong Phoenix sẽ nhận ra thiết bị được gắn vào thông qua cáp.



6. Chọn Flashing / Firmware Update



7. Thông thường sau khi chọn Firmware Update thì Phoenix sẽ tự nhận ra FW đúng với thông số của điện thoại. Chọn Refurbish để Update Firmware.



- Nếu Phoenix không tự nhận ra FW của máy thì click và biểu tượng hình tròn sẽ hiện ra bảng FW tương ứng với Product Code của từng loại máy. Ở đây bạn có thể chọn thủ công hoặc click vào "Detect Product Automatically" để Phoenix tự động gán FW theo đúng thông số điện thoại.



- Chọn Ok và chọn Refurbish để Update Firmware.

.. Sau khi chọn Refurbish để Update Firmware thì các bạn chỉ cần đợi từ . - 7 phút là xong.









Phoenix_Service_Software_.0.0.0..00....5.6_.....ed _Caoquy.x
Pass: caoquy.x?hanoinew.vn


Code:

Phoenix Service Software .0.0.0..00....5.6 .....ed

This Phoenix Service Software installation package includes following SW
components:
- Phoenix Service Software .0.0.......5.6
- DK. Dongle Driver v 7....0..5
- Nokia Connectivity Cable USB Driver v 7......0
- Flash Update Package 0..050.0.5
- FLS-x Dongle Driver v ..0....

Changes/improvements made from previous version .00.........06..:
New products added:
- RM-60., RM-656, RM-657, RM-65., RM-55., RM-6.0, RM-6.., RM-6..,
RM-6.., RM-6.., RM-6..
Products removed:
- RM-6..

New features:
- Nokia Connectivity Cable USB Driver Version 7......0
- Flash Update Package 0..050.0.5
- Menu item WLAN Auto tune added for E7. product
- New RF Losses.ini v .7 for auto tune
- Product Code Change – window is now scalable, SW version information
for variants can now be seen if window is made larger.
Error corrections & changes:
- Support for FPS-. and FPS-.. Flash Prommers removed
- Bluetooth Flasher – menu removed
- Flash Memory test removed
- Changes to WLAN UI to support new WLAN component versions
- Auto tuning components updated to new version
- Label printing changes to improve handling of older data package
configurations. If product has older data package configuration, the user is
advised to enable this option from the label printing UI
- Improvements to Data Package Download. When computer has active
internet connection, product code specific SW files are downloaded from
Firmware Repository. Please note that the path for downloading files
must also be configures to “Options / Product Location” - UI. If paths
are not the same, downloaded SW files are not found.
- Registration error for manual TX power level tuning component corrected.
- Minor menu Changes for RM-5.. and RM-60.
Known errors & limitations:
- Software downgrade with Tucson system is only possible for BB 5.0
products supporting the Data Package . concept.
- Flashing with Flashing with FLS-5, SS-.6 and product specific adapter is
not supported anymore
- If you install old DCT-. data packages, Flash Update Package File
installation path may be wrong. This is caused by very old DCT-. data
packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when updating
FPS-x prommers, please check that Phoenix “Prommer maintenance” is
looking for the files from the correct location which is “C:Program
FilesCommon FilesNokiaTssFlash”. If not, Phoenix will show error
“Update via ini – file failed”. In this case, select “Update” from that Phoenix
“Prommer maintenance” – UI, browse to correct directory and select
“fpsxupd.ini” for all other prommers except the FPS-..
- Multi Flash has limited capabilities, launch Multiflash UI first and then
connect phones one by one, do not attempt to service more than 5
phones at the time
- Some phone models request SIM Lock data to be written in wrong format.
You should use special DLL as a workaround for this product software
related problem. Please see Common SB SB-.0. “Tucson Add-On
Components for SIM Lock version”
- While performing restore or variant change operations with Tucson
system firmware update as a separate activity may increase stability.
- Refurbishment flashing and product code change for RX-5. product
requires SX-. card to be available
- FPS-.. flashing for RX-5. works only with TCPIP connection. FPS-..
prommer with new HW version is needed to correct this, and it is
estimated to be available during .nd half of .0.0
- Please refer to product specific documents and instructions
concerning the limitations of the RX-5. product

Linh kiện máy tính => Vga-LCD-Case-Nguồn-Key-Mouse... <= Đồ nghề game thủ
Mr: Quý | 0..565..07 - 0......... - 0...75.... | Yahoo: caongocquy..
ĐC: Hanoinew - ..0 Lê Trọng Tấn - Thanh Xuân - Hà Nội
Website: hanoinew.vn - lcd.com.vn

Theo "Tinhte.com"

Tin này đã cũ, không liên hệ người đăng
Chữ ký: Chưa cài đặt